Uр Tо 40% оƒƒ BK Precision 2709B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000VDC, 66 Megaohms, 66 Millifarads, 66 MHz
Price review BK Precision 2709B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000VDC, 66 Megaohms, 66 Millifarads, 66 MHz
So you can check out the other reviews 40% оƒƒ Dіѕсоunt BK Precision 2709B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000VDC, 66 Megaohms, 66 Millifarads, 66 MHz at Amazon.com
only with $
| Brand | B&K Precision |
| Power Source | Electricity |
| Style | Digital |
| Item Weight | 1.12 Pounds |
| Item Dimensions LxWxH | 7 x 5.2 x 2.7 inches |
- Digital multimeter measures current, voltage, resistance, capacitance, and frequency
- True RMS (root mean square) meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
- Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit’s diodes
- Backlit LCD is readable in low light and displays present measurement or the maximum and minimum values for the session
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V and Category III installations up to 600V
Product Description
The BK Precision 2709B digital multimeter (also known as a multitester) is a true RMS, auto-ranging meter for measuring current, voltage, resistance, capacitance, and frequency in electrical testing applications. The meter comes with a set of detachable test leads. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The LCD is backlit for readability in low light. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use.
This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 6,600-count resolution, meaning it can display up to 6,599 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), and Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply).
Specifications
Maximum alternating current (AC) input10 ampMaximum direct current (DC) input10 ampMaximum AC voltage input750 volts (V)Maximum DC voltage input1,000VMaximum resistance detected66 megaohmsMaximum capacitance detected66 millifarads (mF)Maximum frequency detected66 megahertz (MHz)Power supply9V battery (one, installed)Standards metEuropean Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1; European Union EMC (EN) EN61326Weight285 g/10 oz.Dimensions165 x 78 x 42.5 mm/6.5 x 3.1 x 1.7 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
BK Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.
What's in the Box?
- BK Precision 2709B true RMS digital multimeter
- (1) Set test leads
- 9V battery (installed)
- Spare fuse
- Magnetic hanging strap
- Instructions
Specifications for this item
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut BK Precision 2709B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000VDC, 66 Megaohms, 66 Millifarads, 66 MHzThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 80% fоr реорlе whо buу BK Precision 2709B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000VDC, 66 Megaohms, 66 Millifarads, 66 MHz рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "Uр Tо 40% оƒƒ BK Precision 2709B Auto-Ranging, True RMS Digital Multimeter, 10 Amp, 750VAC, 1000VDC, 66 Megaohms, 66 Millifarads, 66 MHz"
Post a Comment